← All articles

AGCO will put the Digit humanoid in its Kansas factory: what's signed, what's promised, and whose words these are

Topics: Robots, Industry

A neutral-shaped humanoid robot carries a parts bin across a bright agricultural-equipment factory floor

Short answer: AGCO and Agility Robotics signed a commercial agreement for a pilot project with the Digit humanoid robot. The pilot is due to start in 2027 at AGCO's agricultural-equipment factory in Hesston, Kansas. According to Agility, the robot will sort and stack parts and arrange storage totes. Every statement about the project's benefits in The Robot Report's article comes from AGCO and Agility themselves; there is no independent confirmation or outside expert in the piece. Below: what was actually signed, what the companies themselves say, and what to ask if you're looking at a similar project for your own production.

Where this comes from

Source: The Robot Report's article "AGCO to deploy Agility Digit humanoid in Kansas factory," published October 21, 2026.

What was signed

AGCO and Agility Robotics signed a commercial agreement to deploy the Digit humanoid at AGCO's manufacturing operations. The US pilot is due to start in 2027 and will begin at AGCO's production site in Hesston, Kansas. AGCO describes itself as a global leader in agricultural machinery and precision agriculture technology; the company is based in Duluth, Georgia, and its brands are Fendt, Massey Ferguson, PTx, and Valtra.

According to Agility, its robot will initially support key assembly and production operations: sorting and stacking parts, and arranging storage totes. The Robot Report does not name the deal's value, how many robots are in the pilot, or how long it will run, and the article does not explicitly name which version of the robot is involved (for instance, the Digit 5, unveiled in September 2026 with new legs and batteries, or an earlier one).

Whose words these are

Both key quotes in the article come from employees of the two companies that made the deal, and both talk about expected future benefit rather than an already-measured result. Thomas Enghof, director of manufacturing technology at AGCO, said: "This relationship views humanoid robotics and AI as essential 'teammates' in building flexible, intelligent factories. They unlock automation in complex, human-centric workflows, taking repetitive, strenuous, or hazardous tasks off people's hands." Daniel Diez, director of business development at Agility, said: "By introducing Agility's Digit humanoid robots into AGCO's operations, we have an opportunity to strengthen manufacturing processes, support employees in demanding tasks, and demonstrate how advanced robotics can create measurable impact across modern production environments."

Separately, Agility states that Digit will improve ergonomic safety and operational efficiency and let employees focus on higher-value work. That is the vendor's own claim about its own product's future effect, and the article offers no independent check of it.

AGCO isn't the first: where Toyota, GXO Logistics, and Schaeffler fit in

According to The Robot Report, AGCO is joining a growing number of companies deploying Agility's humanoids, including Toyota, GXO Logistics, and Schaeffler. The article does not say what stage each of them is at: whether a pilot is underway there, as AGCO's is set to be, or the robot is already working at full scale, and it does not give separate results for any of them.

What else is known about Agility and its robot

In September 2026, Agility unveiled a new version of its robot, Digit 5, with new legs, upgraded batteries, and a more complete safety architecture. The company, headquartered in Salem, Oregon, also recently confirmed it is exploring building wheeled robots for its customers. Separately, Agility is preparing to go public through a previously announced merger with Churchill Capital Corp XI: the deal is expected to close in the fourth quarter of 2026, after which the company intends to trade on Nasdaq under the ticker "AGLT."

What to take from this if you're considering a humanoid or any other robot for your production

A story like this one announces an intention and a future pilot, not a result proven in practice: AGCO and Agility are merely planning to test the robot at one specific site, starting in 2027. If your production has no task that comes down to physically moving or sorting items, a story like this is fine to simply note and move on; there's nothing here that calls for vetting vendors right now. If you do have a similar task, say sorting parts or moving totes, it's worth asking any vendor of a humanoid or any other robot four things before putting time into negotiations. First: how many robots are in the pilot and how long it runs under the contract. Second: who will measure the pilot's result and how, for example parts handled per hour before and after, or the number of injuries on similar operations, rather than general phrases like "will improve efficiency." Third: what the pilot itself costs, and what ongoing support will cost afterward if the result is satisfactory, not just a rough per-unit price. Fourth: what happens if the pilot doesn't deliver the promised result: will you get your money back, is there a way out of the contract without a penalty. If a vendor won't answer these questions specifically, offering only general talk about benefits instead, that's a reason to slow down and ask for the pilot's terms in writing before signing anything.

Bottom line

AGCO and Agility Robotics signed a commercial agreement for a pilot with the Digit humanoid robot at AGCO's Hesston, Kansas factory, with a start planned for 2027. The robot is meant to sort and stack parts and arrange totes. Both quotes in the article about the expected benefit come from AGCO's and Agility's own employees; the deal's value, the number of robots, and the pilot's length are not named in the piece.

I work on AI agents and automation. If you'd like to see my projects or talk about your own task, take a look at my portfolio.

Sources